Text Size
A A A
Items in your shopping cart (0 items)

 

8 Bar Flash Error Code

Hoveround Care and Repair series

Transcript 

The following video is part of the Hoveround Care and Repair series. This video is meant for informational purposes only. Do not attempt to perform these tasks unless you can do them safely. Please consult your owner's manual for additional safety features or call 1-800-96-HOVER for additional assistance.

Throughout this video, you will see this graphic appear whenever special caution is needed for your safety. Please pay particular attention when you see this displayed.

An eight-bar flash occurs when the controller has detected a loose wire connection or internal problem with the controller. Step one, ensure the batteries are disconnected and the brakes are locked in the up position before attempting service.

Step two, check for loose motor wires in the junction box. If there are any loose wires, reconnect the wires and turn on the unit to see if the fault has stopped. If the eight-bar is still present, there is a potential issue with the controller. For detailed information on replacing a controller, see our controller replacement video on our website.

If you need further assistance please, contact Hoveround technical support by dialing 1-800-96-HOVER. That's 1-800-964-6837.